July 2, 2018

Lamp Holder Front Universal Steel Black

holder lamp FRONT Universal steel black Lamp holder front universal steel black

holder lamp FRONT Universal steel black 1 Lamp holder front universal steel black
A good bike is only one that provides us with safety while driving and collision-free in every place chosen by us. For this reason, each bicycle segment that is properly functioning in the bike is important. You can be sure that durability is characterized by a steel lamp holder.

The lamp is a prerequisite for every bike. Well, but it must be fixed on something.

This is what the steel lamp holder is proposed for. Very low price and reliable quality encourage everyone to buy several of these accessories. The handle is made of steel, which guarantees solid quality. In addition, you can be sure that it will not corrode.

A screw is attached to the handle, so there is no need to select it later individually.

The handle is constructed in such a way that it allows collisionless installation of various types of bicycle lights. Its installation is easy and everyone can handle it without the help of specialists. It is a product made and indispensable in every bike.

Features:

– steel lamp holder

– black color

Brand: HN Gdynia

hn gdynia Lamp holder front universal steel black

War-Horse License Plate Mounting Bracket For LED Work Light Bar and Work Lamps,Fits most license plates(black,Heavy steel plate)

war horse license plate mounting bracket for led work light bar and work lamps f Lamp holder front universal steel black

  1. No drill, no modification required, Simple and heavy style, beautiful and generous appearance.
  2. Universal: Fits onto most standard vehicle license plates and Fit for car,Jeep, truck, Pickup, SUV, 4×4, etc.
  3. Versatility: Top porous style Various lamp types can be installed.
  4. High quality powder coat resists rust and dirt stains, the mounting bracket is impact resistant and anti-corrosion.
  5. The characteristics of:Simple,Thick

    Multiple holes at the top.

  6. Surface particle spray paint,waterproof,Rust prevention.

Buy War-Horse License Plate Mounting Bracket For LED Work Light Bar and Work Lamps,Fits most license plates(black,Heavy steel plate) here

iJDMTOY Bull Bar Style Stainless Steel Front Bumper License Plate Mount Bracket Holder For Off-Road Lights, LED Work Lamps, LED Lighting Bars, etc (Black, Universal Fit)

ijdmtoy bull bar style stainless steel front bumper license plate mount bracket  Lamp holder front universal steel black

  1. In this case we recommend drilling holes to mount the bracket onto the vehicle.
  2. There is a possibility that the bracket holder may block some vehicles’ parking sensor.
  3. In some cases, you may be able to drill additional holes on the bracket to securely mount the brackets.
  4. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar.
  5. In this case we recommend drilling holes to mount the bracket onto the vehicle.
  6. While reviews might say it is cheap or flimsy, it is not.
  7. If you mount it properly by drilling holes in and attaching it with nuts and bolts rather than screws, it will be very sturdy.
  8. I mounted it to the existing plate holder just drilled through.
  9. Mounted 2 Hella lights on it and it looks and fits perfect.
  10. It’s pretty lightweight so it offers no protection as a push bar would, it’s simply a light mount.
  11. Got into a minor crash when a vehicle backed into me and hit the bull bar.
  12. It wasn’t even bent or mangled, other than a scratch in the paint it was fine.
  13. So if there is any though that it’s flimsy I can tell you it is not.
  14. I recommend using self tapping screws if you have viable metal behind your license plate screws.
  15. Probe before drilling with an awl) I thankfully only had 3″ of foam and air in between the screw holes and good steel.
  16. Gorilla mounting tape on the backside to reduce vibrations, as well as spray a few ounces of expanding foam in the cavity behind the license plate mounts.
  17. I knew the self tapping screws under torque would squish the plastic bumper a bit so I wanted some support, hence the foam.
  18. Subarus bumpers are designed to buckle so you have to get 3″ self tappers for you to grab the interior bumper.
  19. I may also be able to mount this just under my grille, with the bracket hooking over the back to the steel bumper support, as the geometry is perfect.
  20. I’ll probably end up doing that for winter because a snow bank right now would shred this thing off.
  21. Overall, very pleased, my only complaint is that it’s so universal, it’s made for all number plates, US plates leave a 1 inch gap on each side of this mount.
  22. While my lights are pretty big (8″ each, installed 2) this wouldn’t fit them both.
  23. I used a piece of polished aluminum to make it accommodate the lights.
  24. Keep this in mind: If you plan on using the license plate screws this will be VERY flimsy.
  25. I took out the plastic screw mounts and replaced them with bolts and Loctite.
  26. I didn’t want a crazy substantial under-mounted bumper guard and this fits a 20″ LED light bar perfectly.
  27. I actually mounted mine upside down because I wanted the bar itself to be level with where the black underpart of the bumper started.
  28. I drilled 4 holes into the bumper for the exact placement I wanted and put metal flat brackets behind the screw points to give added support to the holes.
  29. I just used 2 simple brackets to mount the license plate.
  30. It’s super sturdy, the welds look great, powdercoating is flawless and installation was as easy as installing a license plate.
  31. Have a pair of 6″ Hella driving lights on it and is solid.
  32. Definitely recommended for anyone looking for an inexpensive way to mount aux lights to your vehicle.
  33. Also, my car which it is supposed to fit, had no metal behind the plastic bumper cover so it will not simply attach via nuts and bolts like they would have you believe.
  34. It will look terrible is just a few weeks of bug guts, rocks, road salt and debris.
  35. I wanted to mount a led light bar to my subaru outback.
  36. I have not installed the bar yet, but the bar itself is very sturdy and we’ll made for the price.
  37. I will end up installing the bar straight to the frame using self tappers.
  38. I will post aging next week when my light bar comes in and I install the bar.
  39. Then I ran into the vibration issue others had mentioned.
  40. This might work IF you could use four bolts and mount it directly on the front bumper.
  41. After it was all done it seemed way too flimsy and a test drive confirmed my concerns.
  42. I didn’t want this falling off taking the lights with it so I removed it and mounted the lights directly to the bumper.
  43. If you can get this mounted using four bolts directly onto the bumper and can fabricate risers to get your lamps to clear the tube then it might work for you.

Buy iJDMTOY Bull Bar Style Stainless Steel Front Bumper License Plate Mount Bracket Holder For Off-Road Lights, LED Work Lamps, LED Lighting Bars, etc (Black, Universal Fit) here

Review Lamp Holder Front Universal Steel Black

Your email address will not be published. Required fields are marked *


Filed under by

Permalink • Print • Comment